Ceramic Fibre

BLANKET

Ceramic Fibre Blanket is a soft, lightweight insulating material ideal for use at elevated temperatures of up to 1400˚C

Ceramic Fibre Blanket is produced by laying loose fibres into a continuous mat roll which is then needle punched to improve strength, allowing for greater surface integrity.

Its lightweight construction makes it ideal for handling (in particular for on-site cutting), fitting and fabrication work.

Ceramic Fibre Blanket is available in a wide range of densities, thicknesses, lengths and widths.

Other benefits include:

Excellent heat storage
Low thermal conductivity
Resistant to thermal shock
Non-combustible
Good tensile strength
Asbestos free

KEY DATA

	1100 GRADE	1260 GRADE	1400 GRADE
MAXIMUM TEMPERATURE ˚C	1000	1260	1425
MAXIMUM TEMPERATURE ˚F	1800	2300	2600
THERMAL SHRINKAGE (%)
24 Hrs @ 1000˚C	1.95	-	-
24 Hrs @ 1100˚C	-	1.95	-
24 Hrs @ 1300˚C	-	-	1.95
CHEMICAL ANALYSIS (%)
AL₂O₃	43 - 46	45 - 48	33 - 38
SiO₂	50 - 60	50 - 55	46 - 51
ZrO₂	-	-	12 - 19
Fe₂O₃	0.6 - 1.5	0.8 - 1.2	0.1 - 0.2
TiO₂	1.4 - 1.9	1.4 - 1.9	0.1 - 0.2
DENSITY	64, 96 & 128 kg/m³ (4, 6 & 8 lbs/ft³)
The data provided is taken from average test results conducted under standard procedures and conditions and should not be used for specification purposes..

USED IN

Petrochemical
Ceramics
Ferrous and Non-Ferrous Metal Production

Power Generation
Furnace and Kiln Linings

DIMENSIONS

thickness	length	width
6mm	29.28m	610/1220mm*
13mm	14.64m	610/1220mm*
25mm	7.32m	610/1220mm*
38mm	4.80m	610/1220mm*
50mm	3.66m	610/1220mm*
*1220mm width available to special order.

Typical Composition

Refractory Ceramic Fibre in the form of bulk, chopped, blanket, blanket modules, board and shapes are made from inorganic amorphous glass fibre (RCF).